Microsim - 0601 Extended precision weight-measuring instrument for static weighing Designation: It is provided for operation with load cells of different types as a part of weight-measuring instrument or engineering equipment. It is recommended to use as a secondary gear for middle-class scales and static weighing systems with up to 6000 graduation marks inclusive, according to GOST 29329.

Standard functions of М0601-А and М0601-B models

• Output of “gross”, “net”, “tare” values for indication;
• Tare mass selection and tare value entry from the keyboard;
• automatic and manual indication zeroing;
• zero self-tuning;
• accumulation and indication of resulting amount of several weighing processes;
• Automatic and manual printing of results, “freezing” of indications;
• Automatic switch to reduced power consumption mode in case of long delay;
• Rate of exchange up to 9600 baud;
• Parallel connection of several load cells (from 1 to 8) with total resistance not less than 80 Ohm;
• The device is equipped with galvanic isolated COM-port for operation via RS485, RS232-C interfaces and printer port.

Additional features of М0601-А model

• Programmable print
• Remote control from a computer
• Serial link via RS232/RS485 up to 57,6 Kbaud
• PC based networking of up to 31 units
• User codes entry during indications saving; they are used as weighing attributes during data transfer to the computer and/or during ticket form printing
• Printing of the form transferred via serial interface
• Remote control via IR-channel (Remote control unit is required. It can be supplied on request)

Features

• Multi-range scales possible
• Bright 6 digits LED 25 mm display
• Internal resolution of 512,000 total counts; displayed resolution of 30,000 counts
• Selectable AC / DC load cell excititation
• Digital filtering
• 2- or 3-point linearization
• Electronic key protection of calibration data
• Rigid aluminum housing with polyester overlay keypad
• Mounting options: on the wall, desktop or column support using the U-bracket mount
• Gross, Net, Tare indicating
• Automatic or keypad entry of tare weight
• Automatic and manual zero setting
• Automatic zero tracking
• Weight accumulation
• Automatic and manual printing
• Up to 9600 baud rate as standard for serial link
• RS-232C / RS-485 optically-isolated serial interface, printer interface

	Modifications and their basic features Characteristic М0601-BE М0601-AE ”Multirange” mode ( 2 x 3000 d ) + + AC excitation of Load Cells + + COM-port RS485/RS232-C with galvanic isolation + + Windows - based Software   + serial link driver DevCom + + serial link and weighing database utility DbWriter   + Program CfgM0601 for label printing setting   + Standard functions + + Extended set of functions   +

	Main technical specification Characteristic Unit Value Working range of input signal measurement (output signal reduced to the input, at rated load), not more mV/V from 0 to 3 Accuracy in accordance with OIML R76   6000 Limits of permissive error within measurement range, in е* units (for scales and weight-measuring instruments): - from 0 to 500 е inclusive - from 500 to 2000 е inclusive - more than 2000 е e ±0,25 ±0,5 ±0,75 Load cell excitation ( 4 or 6 wires ) V from 4,5 to 5,1 inclusive Load cell circuit impedance Ohm from 80 to 1000 inclusive Maximum number of parallel connected load sells   8 (total input resistance should be < 80 Ohm) Length of sensor connecting cable, not more m 200 Operating temperature range oС from - 35 to + 50 inclusive Supply Voltage (through adapter): - voltage - frequency V Гц 220+22-33 50±1 Power consumption, not more VA 20 Height of indication symbols, not less mm 25 Dimensions (without pedestal) mm 105x175x55 Weight with external power supply adapter and pedestal, not more kg 1,4

Specification is subject to change without notice.